Impuls in double formation

[jmluengor]

I started the fifth mission of Patwrogel by selecting the LKA option, with the Impuls 2. Initially, I start with a single railcar and couple a second one to a parking track. After successful coupling and battery activation in the second vehicle, I switch cabs in the main vehicle and report it over the radio. The traffic light turns white, but I can't move forward because my vehicle only has traction in the main unit (although the second does appear on the HUD). Obviously, I understand there's something I'm doing wrong. Can you tell me what it is? Thank you for your time.

[jeroezie]

13 hours ago, jmluengor said:

I started the fifth mission of Patwrogel by selecting the LKA option, with the Impuls 2. Initially, I start with a single railcar and couple a second one to a parking track. After successful coupling and battery activation in the second vehicle, I switch cabs in the main vehicle and report it over the radio. The traffic light turns white, but I can't move forward because my vehicle only has traction in the main unit (although the second does appear on the HUD). Obviously, I understand there'sw something I'm doing wrong. Can you tell me what it is? Thank you for your time.

As far as I am aware, coupling Impulses yourself does not work yet.

[broniewskijarek]

It works. I did it in the single player scenario.

Follow the steps like Hitman in this video:

 

[jmluengor]

Thanks for your replies. I'm going to watch the video now.

[jmluengor]

Well, the video is useful for starting two Impuls 2 units that are already coupled (like in the Piotrków Trybunalsky - Zigerz scenario), but the problem persists when you want to couple two self-propelled vehicles to, for example, carry out mission 5 of Patwrogel using a double 36Wed formation. I've spent many hours trying and finally "thrown in the towel". 😑

[jeroezie]

Mooorits did write on the Discord, that multiple Impulses in onw train does not work yet, and they are still working on making this possible. Its unfortunate, but waiting for a good implemtation of Impuls coupling is probaly for the best. At least that will save our sanety in the meantime.

[mateusz424]

21 godzin temu, jmluengor napisał(a):

(...) but the problem persists when you want to couple two self-propelled vehicles to, for example, carry out mission 5 of Patwrogel using a double 36Wed formation (...)

Before coupling in front cabin of second unit (from the coupling side) you have to:

• turn on the battery,
• select rear pantograph,
• activate cabin,
• raise the pantograph,
• turn on the main switch (quick switch),
• release the spring brake (if is turned on),
• deactivate cabin.

After coupling you have to come back to this front cabin of second unit to make sure the main switch is still turned on (because it turns off automatically during coupling). If is turned of (three red indicators on the train status display) - turn it on again. And one more important thing: during coupling the ETCS system is activating brakes and shows red icon:

and display message: "rolling stock convergence". You must clear this message to release the brakes on the second unit. To do this, click the field with the driver ID, then click the same field labeled SHP in next step. The yellow ETCS button will start flashing; click it (or press the spacebar). This will release the brakes on the second unit. Also, make sure the speed controller is set to 0 (not -0, not +0, but exactly 0), the air brake lever is in the travel position and spring brake is turned off. If so, deactivate the cab.

Then, go to the cab of the first unit, from which you approached the second unit. This cabin after changing direction will be the rear cabin of the first unit, so you have to turn everything off there, the selection of pantographs also to position 0, only the battery have to stay turned on.

Switch all in front cabin of first unit. And it should be possible to move it.

[jmluengor]

Well, I've got a job for tomorrow!