Bescot

The game holds you to the signal speed right until the NEXT signal instead of when you have cleared your switches. Shown a big problem when leaving Starzyny towards Tunel as you get a S6 aspect, but cannot go up to 160kph until you reach the next signal at 15km away.

Having same problem today with the Traxx. Maintenance didn't fill the washer bottle.

Did yesterdays hotfix just turn off the volumetric lighting globally? It's a shame because since that fix we don't have the volumetric lights on lamp posts in yards, platforms or streets.

Same for me. Really bad with the modern trains with powerful front lights. Hope the devs fix this.

1. It has been commented in various threads that brake timing for application down the train, and release is too quick for long freight trains. Can this be looked at? 2. This is made worse in the ET25 because we are unable to change the brake mode from P. Please make it possible to alter the brake mode between R/P/G

I like this idea for drivers too. At the moment if you do not want to use a mic, you have to type messages which can be a pain when your trying to drive properly. If there was a click spot on the radio chat to open a preset menu of written dialogue (or even spoken via TTS) it would be good.

Well, I don't think the fix worked for some of us, we've discussed it on the discord server. This only seemed to have got worse since the last patch (or one before?) 60+ fps, but micro stutters constantly - It doesn't matter what resolution or game graphics are chosen, it persists. Here's a vid from my Ryzen 7 3700X 8-Core 3.60 GHz, 3060ti, 16GB RAM, latest Geforce drivers, all Win 11 updates. 4K resolution in this test, but 1440 does the same. https://streamable.com/cw2z6i

Coming from Olkusz to Bukowno the line speed drops to 40 before Bukowno station - but the HUD does not warn of this line speed reduction.

The ELF and Pendolino cab light switches still don't flip/flop, could devs take a look please? The keybind will only increase. Edit: The Pendo actually doesn't seem to flip/flop in any of the switches on the edge of the desk, so wipers etc don't switch off from keybinds.

Nobody wants to comment on this? I'm finding the thing un-drivable. As soon as I put the train brake to minimum application the brakes just come on very hard. The Traxx and Seven feel much more realistic.

Strange yeah. I did have DLSS on ultra before the patch but ended up having to put it on balanced mode after due to a fairly big fps drop in the 3060ti@4k - 60fps down to around 45fps. Is DLSS scaled differently now?

Same here. Tried on two different machines. One is a Ryzen 7-3600X/RTX3060ti and the other is i9-12900k/RTX3080ti. Both have steady high frame rates (60 or 144fps on a g-sync monitor) but as I drive the scenery isn't fluid.

On the EN76/96 train I get disconnected from the server when I open the doors, so unable to drive this train any more. Server EN1 SimRail_log_2023-01-29_13-09-23.txt

Can I query the brakes on the Dragon + flat wagons? The MINIMUM train brake setting is very forceful (and gives a 0,5bar reduction) and is VERY quick to apply 8% down the whole train. I know little about this loco, but could it be checked that brake type is set to freight and not rapid, and if the force is correct? If you compare it to the E186 + coal hopper wagons they behave more like I'd expect, where the air takes a while to propagate and the brake pipe reduction is delayed due to this. The dragon + flats seems to brake more like an EP, which I doubt is realistic.

I drove a 424*** with E186 and the 20 short speed restriction for open crossing at JULIUSZ didn't update afterwards in the hud. It only updated past the signal box at Wschodnia when it changed to 70. I switched to bot driver for a bit and he stayed at 20 all the way on L171. Not sure when this started to happen as it worked ok a few days ago. It's a LONG drive at 20km/h and caused a 18 minute delay. See second screenshot where rear of train has cleared the 20, but HUD didn't update to correct line speed. Also this crossing has broken cars - they don't stop for trains. SimRail_log_2023-01-24_21-46-32.txt

Can you add animation so that the radio channel knob moves to show the correct channel when on auto? It appears to stay on R1, even though the radio channel has changed by the auto feature

Driving into Zawiercie on track 4 I received a S13 speed limit 40 km/h at entry signal ZW R, but the HUD stayed at 80 km/h. I was routed towards signal ZW O108

The ED250 has no track running sounds outside of the train, just motor sounds. Can these be added?

It's just happened again now EN1

EN1 22.1.2023. This train had been sat at Tunel loop since 5 hours ago - it was waiting for a Pendo from Krakow to pass. Unfortunately the freight train was a bit long for the loop line. It's wagons were fouling the points and blocking the line the pendo wanted to take. As such I saw a 5 hour back log of trains. TL;DR some freights like this are too long for the loop at Tunel station and cause a blockage.

SP is definitely a problem area for the AI. Why would it say the line is clear for a train when it isn't? I noticed tonight on a different server EN2 which was entirely AI that SP had a 42xxx on each platform heading east. towards SD. These were blocked from leaving by a 24xxx on the single line east of SP. Another 42xxx was stuck west of SP at it's entrance signal. SD had westbound trains on each track. SD shouldn't be allowing trains onto the single line unless SP is clear, and SG shouldn't allow trains from SG unless it has a clear platform. This is AI error (sometimes' human, but not in the above cases). Maybe SP should reserve one platform for eastbound moves and the other for west.

The passengers have sunk into the platform here at Porąbka with just their heads showing.

Please turn on the auto completion of delay reporting as default. Otherwise new dispatchers will not realise they should do this, and late trains won't get reported via edr properly.

https://forum.simrail.eu/topic/1531-whole-screen-flashes-when-any-en7696-near-by/#comment-8108

It is caused by a glitch with the mirrors in the elf. If you turn off mirrors in settings, the glitch doesn't occur.