jmluengor Posted April 9 Posted April 9 How kind and generous you are! I'll try it tomorrow because I just got home.
patwrobel Posted April 10 Author Posted April 10 (edited) Nowa wersja 1.6.10 (link do ręcznego pobrania: 44_patwrobel.7z) -poprawka w Respawn (wolne wczytywanie pociągu gracza) -poprawka wyjazdu z Łodzi Widzew @jmluengor I added some fixed for Your problem with start from another stage - suggest from DEV. Please check again start from Łódź Widzew Edited April 10 by patwrobel 1
jmluengor Posted April 10 Posted April 10 I finished this fantastic scenery you gave us 10 minutes ago. I'm going to try version 1.6.9 now, starting from Łódź Widzew and including the wagon additional, to see what happens. I'll comment on the result later.
jmluengor Posted April 10 Posted April 10 Satisfactory report and scenario completed again, now with version 1.6.9 After waiting about two minutes for the virtual controller to do its job, I appear stopped on the track about 4.3 km from Łódź Widzew. The EU07 is cold, so it takes me a little while to get it going. I turn on the radio (which is already tuned to channel 7). Seven minutes late, I arrive in Łódź Widzew, and the other locomotive brings the additional wagon, which I couple to the rear. Successful brake test, radio communication, and departure signal. I'm off! Once again, thank you for your fantastic and invaluable work!
patwrobel Posted April 10 Author Posted April 10 18 minut temu, jmluengor napisał(a): Satisfactory report and scenario completed again, now with version 1.6.9 After waiting about two minutes for the virtual controller to do its job, I appear stopped on the track about 4.3 km from Łódź Widzew. The EU07 is cold, so it takes me a little while to get it going. I turn on the radio (which is already tuned to channel 7). Seven minutes late, I arrive in Łódź Widzew, and the other locomotive brings the additional wagon, which I couple to the rear. Successful brake test, radio communication, and departure signal. I'm off! Once again, thank you for your fantastic and invaluable work! When You start from Łódź Widzew the train it cold? It should be in drive and have 120km/h speed. It's that happend onYour computer becouse when I create the train and teleport the player the plater-Train is in Virtual State (without model on map) so developer suggest to wait for Vehicle loaded but I must change after stat state of train and set speed again and it fixed for You. In the next verson I changed it
jmluengor Posted Friday at 08:19 PM Posted Friday at 08:19 PM (edited) As I said, I finished your extraordinary scenery in both version 1.6.8 and 1.6.9, and I didn't mind having to get the locomotive running; quite the opposite, in fact (it's all about having fun). It's just that the scenario doesn't behave exactly as you, its creator, intended. I absolutely loved it. You deserve a monument. Edited Friday at 08:20 PM by jmluengor
jmluengor Posted Saturday at 07:33 PM Posted Saturday at 07:33 PM Version 1.6.10 Yesterday I didn't see that version 1.6.10 was available, and as I told you, it was related to version 1.6.9. I've installed version 1.6.10, and this is my report (I've attached the corresponding log file). - I start the scenario at 20:41 and, after selecting locomotive EU07 and Łódź Widzew as the starting location, I accept the extended scenario to couple the additional car. - The virtual controller takes three minutes (20:44) and I appear 4.3 km from Łódź Widzew, in the cab of the cold locomotive. - I start it and connect the radio, but the radio transmitter screen remains off (although it is tuned to channel 7). I arrive in Łódź Widzew 7 minutes late, and the other driver parks the carriage I need to couple behind me. I couple it, perform the brake test, contact with the dispatcher, the exit signal opens, and I leave the station. I'm ending (interrupt) the scenario at 20 minutes and 17 seconds. Thank you for your patience. SimRail_log_2026-04-11_20-40-15.txt
patwrobel Posted Monday at 10:09 AM Author Posted Monday at 10:09 AM Nowa wersja 1.6.11 (link do ręcznego pobrania: 44_patwrobel.7z) -poprawka w Respawn dla wolniejszych komputerów -poprawka startu z Łódź Chojny -dodanie osobowego w peronie Łódź Kaliska -aktualizacja tłumaczeń ES (dzięki @jmluengor) @jmluengor Please check start from Łódź Widzew and Łódź Chojny - it should work now. Train should be active, hot and have start speed
Giannis Greece Posted Monday at 11:22 AM Posted Monday at 11:22 AM 1 hour ago, patwrobel said: Nowa wersja 1.6.11 (link do ręcznego pobrania: 44_patwrobel.7z) -poprawka w Respawn dla wolniejszych komputerów -poprawka startu z Łódź Chojny -dodanie osobowego w peronie Łódź Kaliska -aktualizacja tłumaczeń ES (dzięki @jmluengor) @jmluengor Please check start from Łódź Widzew and Łódź Chojny - it should work now. Train should be active, hot and have start speed Christ is Risen! At the beginning of the scenario at Katowice station, I get an error when I try to start."
patwrobel Posted Monday at 11:51 AM Author Posted Monday at 11:51 AM (edited) 59 minut temu, Giannis Greece napisał(a): Christ is Risen! At the beginning of the scenario at Katowice station, I get an error when I try to start." I found the problem and fix'ed it on new version 1.6.12 - too long cargo na Zawodzie and block the swift Nowa wersja 1.6.12 (link do ręcznego pobrania: 44_patwrobel.7z) -poprawka w Katowice Zawodzie Edited Monday at 12:22 PM by patwrobel
jmluengor Posted Monday at 03:48 PM Posted Monday at 03:48 PM (edited) 5 hours ago, patwrobel said: Nowa wersja 1.6.11 (link do ręcznego pobrania: 44_patwrobel.7z) -poprawka w Respawn dla wolniejszych komputerów -poprawka startu z Łódź Chojny -dodanie osobowego w peronie Łódź Kaliska -aktualizacja tłumaczeń ES (dzięki @jmluengor) @jmluengor Please check start from Łódź Widzew and Łódź Chojny - it should work now. Train should be active, hot and have start speed Version 1.6.11 - I start the scenario in Łódź Widzew and accept the extended scenario to couple the additional wagon. - The virtual controller takes 1 minute, and I appear in the cab of the EU07 traveling at 120 km/h. - I arrive in Łódź Widzew 1 minute late, and the other driver parks the carriage I need to couple behind me. I couple it, perform the brake test, contact the dispatcher, the exit signal opens, and I leave the station. ALL PERFECT! - I restart the scenario, this time from Łódź Chojny. The virtual controller takes 2 minutes to place me in the cab of the EU07 traveling at 100 km/h. - I arrive in Łódź Chojny 1 minute ahead of schedule. I board a 36Wed at the station, wait for the signal to change, and head out towards Łódź Kaliska. I arrive at Łódź Kaliska, transfer passengers, and leave the station. I cancel the scenario 19 minutes after starting it. EVERYTHING PERFECT! Edited Monday at 03:50 PM by jmluengor 1
patwrobel Posted yesterday at 05:39 AM Author Posted yesterday at 05:39 AM Nowa wersja 1.6.14 (link do ręcznego pobrania: 44_patwrobel.7z) -poprawka w Łazach przy wyprzedzaniu przez EIP @Masterczulki poprawka specjalnie dla Ciebie - dzięki pomocy Dev SimRail @kojonek2 (jeszcze raz wielkie dzięki) udało się znaleźć błąd w scenariuszu (dziwne że u mnie to działało normalnie). Sprawdź teraz wyprzedzanie w Łazach przez EIP powinno działać 1
patwrobel Posted 11 hours ago Author Posted 11 hours ago Nowa wersja 1.6.15 (link do ręcznego pobrania: 44_patwrobel.7z) -poprawienie inicjalizacji radia przy przejmowaniu składu od BOTa 1
mateusz424 Posted 10 hours ago Posted 10 hours ago (edited) Wiem, że to nie ten wątek, bo to nie ta misja. Ale w nawiązaniu do radia: w misji nr 5 (Łódź Widzew - Warszawa) wyprowadzamy z szopy skład dla kolegi. Obowiązuje łączność najpierw na kanale 9, później na kanale 7. Następnie w identyczny sposób manewrujemy po drugi ezt już dla siebie. Gdy na początku mamy łączność na kanale 9, to obowiązującym kanałem pozostaje kanał nr 7 z poprzednich manewrów. I jadąc do bramy wyjazdowej z szopy dostajemy punkty karne za jazdę z niewłaściwym kanałem radia. Z 9 na 7 zmieniamy dopiero tuż przed bramą, punkty dostajemy zaraz po ruszeniu. Drobiazg, ale warto poprawić 😉 Edited 10 hours ago by mateusz424
patwrobel Posted 9 hours ago Author Posted 9 hours ago Mówisz masz 🙂 Nowa wersja 1.6.16 (link do ręcznego pobrania: 44_patwrobel.7z) -Misja 5: poprawka radia na start ŁKA (kanał 9) 1
patwrobel Posted 3 hours ago Author Posted 3 hours ago To jest prawidlowe zachowanie. Tor zablokowany i zrobila sie kolejka Pendolino utknelo 🙂 1
Recommended Posts