jirovy.filip Posted January 2 Posted January 2 Hello, I have been trying to do the cargo scenario from Kraków but have no idea how to set the two units correctly. They both draw power at least but when I am asked to hit the vigilance button, only the 1st unit clears it I think. Does anyone have a clue what to do about it?
SIMRAIL Team Królik Uszasty Posted January 2 SIMRAIL Team Posted January 2 Slave: pantographs down, converter and compresor off, no cabin actve, reverser neutral, main controller 0, shunting 0, main brake cutoff/disabled, only battery on. Master: you start locomotive the same way like single. 1 1 1
jirovy.filip Posted January 4 Author Posted January 4 Thank you, I will try that again, somehow managed to do it properly but no idea how 😄
VinnanGaming Posted January 10 Posted January 10 Following this gives current in both vehicles but i can't get the train moving. As i move the power controller into 1, 2 and 3 step current is being put through properly - but it sounds like brakes are engaged and the train is not moving. However, no brakes are engaged in any of the locos. Brake hoses are connected properly. No local or manual brake engaged anywhere. Any ideas?
Fightdrug Posted Tuesday at 02:22 PM Posted Tuesday at 02:22 PM Am 10.1.2025 um 08:13 schrieb VinnanGaming: Following this gives current in both vehicles but i can't get the train moving. As i move the power controller into 1, 2 and 3 step current is being put through properly - but it sounds like brakes are engaged and the train is not moving. However, no brakes are engaged in any of the locos. Brake hoses are connected properly. No local or manual brake engaged anywhere. Any ideas? did you maybe forgot to remove the loco brake fully ? 🤔 was one time the problem with me
Recommended Posts