Glendathu

I don't know if its still relevant now but you can assign EVERY key that you can use on your keybord to your Xbox controller by using the Steam controller settings that you find on the Steam page of your installed SimRail game. If your controller is connected, there's an option on the right side with controller settings.

Had the same problem, as the loco brakes are all off default, when I released the handbrake of the slave engine, I could accelerate much better !!

I struggled with the double-traction TME-324040 scenario (Krakow-Warzawa), but I think finally I got it. The battery can only activated in cab 1 (or A) of each loco. And I had to release the handbrake of the 2nd loco, otherwise it was braking all the time.

Ah, that‘s what I assumed. Thanks!

I have noticed that some links of the LUA section result in an "Unoutorized - You cannot view this page" message. These are: List of functions: CreateFullBotCommand CreateMediumBotCommand CreateShortBotCommand Radiostop SetTrainsetAgressionTraction SetTrainsetAgressionBraking SetTrainsetAgressionCoasting List of Structs: BotCommand Also the Vehicles Section which is refered to from the LUA part is not accessible. Is this an error are are these pages just not written yet ?

Thanks for your LUA hint ! I wasn't aware of it because the scenario I edited was still with JSON files... So I will look through a LUA programmed scenario and try to understand it's structure. I already found the LUA Scenarios page in the SimRail wiki. Anything else that could help ? And thanks for NOT wasting my time 😀👍

This is the button on the display that you press when reaching a sign for increasing speed. The computer calculates with the train length you had entered at the start of the journey and when it is save to increase speed, you hear a beep. During travel it is a bit fiddly to target this button on the display in the right moment, so I would prefer a keybinding for that. Pleeeaase ! 🙏

After looking through JSON and XML files of a Scenario, I finally managed to edit the time of day, season, weather and the beginning time. I also can now exchange the train formation (thanks to Pitoras' TrainsCreator👍) and the timetable. Also the time when at departure the signal has to change to green. And I managed to change the final station if this was already included in the original scenario. But I have a question about how the JSON file of a scenario is executed. Are all these ID numbers e.g. "$id": "6" always executed one after the other or can there be jumps to different ID numbers? At the end of some code blocks is a "$ref": "##" command. Is this a jump to a different ID or a subroutine ? I wondered because I want to insert a weather change e.g. between "$id": "66" and "$id": "67". Can I give this weather change block the ID "67" and then rename all following IDs +1 ? If there are jumps in the code, this wouldn't work because a jump would end on the wrong ID then... Thanks for enlightening me!

On Warszawa-Katowice, about 6 km ahead of Biała Rawska is a neutral section. While driving the ET25, this did not appear on the ETCS Screen.

Pierwotnie pobrałem wersję Simrail Wiki, ale teraz odkryłem najnowszą wersję tutaj. Czy jest szansa na aktualizację ET22? i ewentualnie ustawienie zmiany języka na angielski? Na szczęście w telefonie komórkowym jest Tłumacz Google, więc mogę zapisać, które przyciski do czego służą. Ale byłoby łatwiej po angielsku. Dziękuję bardzo! >translated with DEEPL<

Ah, I couldn't figure out what this abbreviation meant. Thanks for enlightening me !!

If you setup the ETCS with a German language, the #3 "Train Data" is translated with "Zugbesy". This word or acronym doesn't exist. Correct would be "Zugdaten". If there are not enough letters for this you could also use "Zugart" or "Zugtyp"

This is the best addition for Simrail ever ! Although I'm German, I prefer the Polish announcements because that feels more authentic. The only thing I would change is the loudness. Depending on the train the announcements (with max setting) could use some more volume. Merci beaucoup and keep up the good work !!

I'm no traindriver in real life and I feel this is only very annoying. But I can imagine that real traindrivers who had people on the track in real life don't feel very good about this. This is a simulator game, perhaps Fortnite is a better game for these people ? 🙄

I don't know if that is really such a good idea in Warzawa Centralna because of framerates. This is the only station where the framerate drops dramatically. I don't think that more passengers are helpful there...

Dyskusja na temat realizmu jest taka sama, jak na przykład w przypadku symulatorów lotu. Są ludzie, którzy chcą, aby było to tak proste, jak to tylko możliwe, jak w grze zręcznościowej. Są też ludzie tacy jak ja. W swoim życiu zawodowym nie byłem ani maszynistą, ani pilotem, ale uwielbiam zapoznawać się z takimi systemami technicznymi i ostatecznie je opanować (o ile jest to możliwe w symulacji). Z tego powodu uważam, że dobrze jest, gdy istnieje możliwość wyłączenia niektórych opcji, nawet jeśli sam z nich nie korzystam. W ten sposób korzystają obie strony, "gracze" i "symulatory". A jeśli ktoś woli być graczem, nie osądzam go za to! P.S. Mam nadzieję, że Deepl dobrze to przetłumaczył...

Mógłbym sobie wyobrazić, że dzieje się tak, ponieważ jeden lub więcej pociągów AI porusza się w scenariuszu, więc tor jest zablokowany. Nie sądzę, żeby to było takie złe, zdarza się to również w prawdziwych operacjach. A za spóźnienie nie odejmuje się aż tylu punktów.

Tak, to prawda, czasami czerwone sygnały doprowadzają do rozpaczy... Ja również gram dopiero od 2 miesięcy i jestem zachwycony Simrail! Ale część multiplayer jest jeszcze lepsza niż scenariusze! Czasem trzeba poczekać dłużej, bo w nastawniach są inni gracze, ale za to mamy aktualny czas i pogodę! Nie ma nic bardziej relaksującego niż prowadzenie pociągu towarowego w nocy z EU07...

Poszukałem w google prawdziwego połączenia kolejowego i znalazłem: Sędziszów odjazd 4:32 - Katowice przyjazd 6:35 czas podróży 2:03 Dla kontrastu, jeden z rozkładów jazdy Simrail: Sędziszów odjazd 0:39 - Katowice przyjazd 0:52 czas podróży 2:13 Tak więc maszynista pociągu prawdopodobnie spieszy się jeszcze bardziej w rzeczywistości niż w symulacji! (Przetłumaczone z DEEPL)

First off all, I think the sound of the game is by far the best I ever had in a train simulation ! I can feel every gap in the track with my attached buttkicker gamer ! 🤪 What I am missing is: 1. Some kind of echoed sound in the tunnels at Warzawa and Tunel 2. A more metallic sound when driving over a steel bridge 3. When I forget to switch off the wipers after the rain is over, some screetching sound 4. The EU07 has no acoustic feedback when the doors are closed at departure. I bet they are not silent...

Now they have closed Tegel, we have a now one ! Called "The Neverending Story" EDDB. 😁

Hey, that's great ! Only MS Flight Simulator👨‍✈️ has this real weather so far. And Simrail 👍 The developers should mention that in the description on Steam. All other Train Simulators have random weather changes but not REAL weather. I had one day with snow in Multiplayer and I really enjoyed that ! It looked so beautiful. And the idea with the complaining passengers is superb ! 😆 Thank for your explanation !

I would guess it‘s set to current season ? And snow, rain or fog are generated randomly? Or is real weather data used?

You know that you can rebind the keys yourself ?

Ah, das ist es. Ich hatte als erstes den Link mit der "Link" Funktion reinkopiert, aber dann nur den Link zum Video da stehen. Danke für deine Hilfe. Aber nun zum Video. Ist zwar keine Simrail Strecke, aber ein schönes 4K Video des EN57 mit Blick auf das Fahrpult: