Asrtiu

When transitioning from L1 to L2 or viceversa the Planning Area in the DMI doesn't show the information after the transition, even though, it does so when further away, this happened in EIP1331 going t o GM (from Pruszków) SimRail_log_2025-08-16_23-28-52.txt

I experienced a "Error Reading Balise" on INT9 joining EIP 1331, exiting Prusków (GM direction) on the 16th of August in ETCS L2. SimRail_log_2025-08-16_23-28-52.txt

I would have thought the same if the bug report didn't get approved and such, if it were to be a feature it'd probably be classified as "duplicate or invalid" so, using that as our base we can deduce they themselves don't consider it a feature and it is in fact a bug.

After almost 8 months, this is still an issue on all tap changer locos

3D31B3~1.MP4 Appeared (apparently) randomly after around 10PM UTC+1 of the 4th of August on INT1 server all along LK62 and Tunel-Sedziswów linesSimRail_log_2025-08-04_21-34-20.txt

This is in addition to this topic: Which was presumably fixed but there're still ocasions where certain players don't have an overhead player name even though it's enabled and other players DO appear with it. Example: Happened in INT1 but can happen everywhere (don't mind the F8 menu, I was checking the achievement progress) SimRail_log_2025-08-03_15-36-08.txt

In Dabrowa Górniczca Zabkowice the chat window for Lazy Lc is linked to Lazy Lb instead of Lazy Lc and so when someone's at Lazy Lc but no one is at Lazy Lb you cannot talk to them.

Switch 51 in Warszawa Wlochy is very hard to select since you have to press just the 2px wide left edge of the yellow square.

It's not possible to enter the WC in EN57-206 ra coach but it's possible to enter it on rb coach.

Translations are missing in Singleplayer scenarios in the Next branch (have only checked IC Lodz-Warszawa scenario but it probably applies to all scenarios with the new settings to choose custom settings for the scenario)

After being for a while in the main menu, doing other stuff, I wanted to find a service to play in MP, first thing I noticed was that the menu audio was gone and no audio was there, I thought maybe nothing I entered a service on MP sound was back but, many of the controls were not working on the keyboard, some did like escape and walking, but stuff like acknowladging SHP/CZ didn't work, cameras as well, everything related to operating the train apart from the throttle didn't work, even though it worked fine in other apps. SimRail_log_2025-05-03_11-37-27.txt

The shadow from the light bulb on the right headlight of the EN57 (haven't checked EN71 nor other Kibel liveries) leaks through the light it-self of the headlight, it doesn't seem to happen to the left headlight

The gradient indicator on the ETCS DMI, sometimes does weird stuff and doesn't display the actual gradient correctly, sometimes it fixes it-self after a while and sometimes it feels like it doesn't, there're 2 cases a) There's a gradient of X value and then the DMI says that the next gradient after X is the same as X but when you reach the 2nd gradient it goes to a different value(Y) Example: Current gradient is 0.5% and the DMI says the next one is in 500m and is also 0.5% but once you reach it it changes to 0.3% Video of case a: clip_1.742.132.567.163.mp4 b) There's a gradient of X value and then the DMI says that the next gradient after X is different (Y) but when approaching you visually see it doesn't make sense (ie. the DMI says you're going to go down faster but you start to climb) and so when you reach this new gradient it changes to a different value. Example: Current gradient is 0.5% and the DMI says the next one is in 500m and it's a 1% gradient but when you approach it yous ee that you actually start going down, and so when you reach said gradient the DMI refreshes and says it's actually a -0.2% gradient. Video of case b: SimRail - The Railway Simulator - 2025-03-16 14-44-06.mp4 SimRail_log_2025-03-16_10-27-20.txt

Simply enough, this is still happening some player trains (seemingly) at random don't have the player tag, while others do. (since the original topic is closed, locked and "fixed" I'm opening a new one for you guys to know that in the end it wasn't fixed/it reappeared) Same behaviour as before... so best I can do is linking up the old bug report and posting a new log: SimRail_log_2025-03-15_15-52-48.txt

There's a weird thing going with the OHLE where the line tensioners are doing weird things with the cables, like merging with other cables and with some physically difficult "turns". This happens on the CMK from Strzalki northbound up until Grodzisk Mazowieckie. It happens every other cable tensioner (so around every 1000 meters) Southernmost weird cable tensioner location shown in pictures above: S: opoczno_warszawa_grochow_terrain_x166_z304, P: (85027.49, 171.34, 155706.20), R: (357.30, 6.21, 0.00) SimRail_log_2025-03-15_15-52-48.txt

On the Dragon 2 the acceleration is reduced between Diesel and electric modes, and so the ∑kN (total force delivered in kilonewtons) should be lower in Diesel mode, but on the screens, it doesn't change, in fact you can see that for example you're running the diesel at max. power with just the loco no cargo, and it may display 120kN at 95km/h but it's struggling to maintain speed which doesn't make any sense while the UI is showing that it is drawing 90A. As you can see in the following images the same power delivered is shown even though the acceleration is much slower on the diesel mode. PS: I have accidentally posted this bug in General Discussion [Singleplayer] so if you want you can delete it SimRail_log_2025-02-23_10-48-28.txt

As shown in the picture below, a track in Psary isn't covered by snow Location: S: lazy_psary_terrain_x88_z106, P: (45360.72, 266.87, 54695.47), R: (5.72, 57.75, 0.00) (just before the last switch before the exit signal to Gora Wlodowska)

There's a missing bridge of the LHS which can be seen from the cab in LK62. Location: S: psary_opoczno_terrain_x107_z40, P: (55062.56, 320.69, 20667.39), R: (356.11, 298.16, 0.00)

Some holes in the map which can be seen from the map near Charszniczca: Location: Where Tunel_Kraków_Terrain tiles intersect with the Psary_Opoczno_Terrain tiles

There's a weird stretch like a triangle with missing vegetation (grass, trees and others) near Zarczercze: Position: S: lazy_psary_terrain_x72_z25, P: (37280.46, 364.57, 13007.60), R: (12.72, 29.74, 0.00)

On the Dragon 2 the acceleration is reduced between Diesel and electric modes, and so the ∑kN (total force delivered in kilonewtons) should be lower in Diesel mode, but on the screens, it doesn't change, in fact you can see that for example you're running the diesel at max. power with just the loco no cargo, and it may display 120kN at 95km/h but it's struggling to maintain speed which doesn't make any sense while the UI is showing that it is drawing 90A. As you can see in the following images the same power delivered is shown even though the acceleration is much slower on the diesel mode. SimRail_log_2025-02-23_10-48-28.txt

Floating catenary masts in the CMK at km 113.4 S: psary_opoczno_terrain_x127_z207, P: (65297.87, 207.56, 106250.50), R: (15.96, 18.29, 0.00)

Location S: katowice_lazy_terrain_x14_z6, P: (7463.67, 273.95, 3495.44), R: (8.95, 67.27, 0.00)

After changing settings during a drive near Zawiercie where I changed from TAA-->MSAA-->TAA again the ballast started appearing and dissappearing like an LOD issue it's worth noting that I have modified the settings.conf file and I've manually set the max. cars to 100 and Traction, Tracks and People cull distances to 2000m (please make it possible from the in-game menu to pot 2000m) This happened on INT1 on the 20th of February on service 464030

When driving the Dragon 2 (ET-25/E6ACTd) there's a weird graphical artifact where the textures and objects inside the cab behave weirdly, I reported this bug more than half a year ago, I'm sorry for duplicating it, but it hasn't been fixed, it didn't get approved and now it's locked. I tried disabling TAA and everything but the bug persists (I think it's not only on the Dragon 2 i think but it's the loco which is most noticeable at) clip_1.740.076.824.615.mp4 This happened in INT1 on February 20th on service 464030 near Staszic. SimRail_log_2025-02-20_16-02-38.txt