livin2thefullest

Bringing up an older post that’s been partially addressed I think breaking up some of the 1+ hours scenarios into smaller chunks would be a great feature. Much thanks, appreciations and respect to the hard work of the game developers for creating such a fun game and adding the much needed Save function. However, it would be a great to have the option to complete the longer scenarios as is or broken up in to multiple stages/parts or legs of say around 1 hour each.

I just tried the scenario on the New Sp branch and it ran fine without any problems. The addition of the suspension makes for a nice effect.

While playing on the Next Sp Build the driver loads in the cab facing the wrong direction (toward passenger coaches) after resuming a saved game. The HUD displayed includes steam locomotive as well as electric locomotive parameters. S: katowice_lazy_terrain_x19_z13, P: (10120.17, 284.50, 6716.86), R: (2.49, 272.80, 0.00) imRail_log_2026-01-15_19-11-13.txtSimRail_log_2026-01-15_19-11-13.txtSimRail_log_2026-01-15_19-11-13.txtSimRail_log_2026-01-16_20-57-43.txt

Yes….i stopped for 10+ minutes at the red signal and never received permission to proceed. Regarding the EU-07’s, I was able to run the scenario using the Steam Workshop version and not enabling the passive switch on the trailing locomotive. I could see the amps on both locomotives and had plenty of power for a heavy haul cargo train. The scenario ran fine with nice scenery, speeds, track changes and lightening effects. I only had a problem toward the end of the scenery when I was stopped by a red signal and unable to proceed even when a request was made to the dispatcher.

Have you checked the SimRail Wiki? It has some good information. https://wiki.simrail.eu/Vehicles/Poland/Trains/Locomotives/Traxx

I tried playing the scenario after downloading from the forum and when using the two modern EU07 was never ablet to get the second unit to apply power. Using the passive switch on the trailing locomotive in the on or off position did not matter. I then tried using the version of the scenario from Steam and was able to get the second unit to apply power but only if I did not switch the passive switch on in the trailing locomotive. Not sure if the passive switch is functioning correctly? I got stuck at a red signal (S: katowice_lazy_terrain_x-14_z2, P: (-6864.63, 265.51, 1490.47), R: (10.01, 263.58, 359.03)) and was unable to complete the scenario. When I tried running the scenario using the ET26 (Heavy unit cargo, 3282 tons, 747 meters, G brake, cargo DLC) once I connected to the cars, I was held up at a stop signal before LB and never given permission to proceed. The dispatcher gave message saying he could not allow trains to proceed early.

It would be great to see the current radio channel on the HUD. The in cab camera position allows you to get a partial video of the radio screen on some locomotives. The older locomotives don’t give any option that I know of other than moving the camera inside. Having the radio channel displayed on the HUD would help keep the drivers view looking forward and minimized need to use the mouse while using keyboard controls.

Is it possible to have the scenario translated into other languages?

I just completed the scenario and had no problems running it. I still need to work on my driving skills and maintaining schedules. 👍

I just tried out the patch/fix provided and was able to successfully complete the entire scenario. Thank you.

I just downloaded the most recent update and tried the ETCS 1 scenario. I still had the same problem after about 20 minutes of play when reaching the two parallel yellow light signal/malfunctioning grade crossing point. After the verbal direction was given the keyboard and mouse controls still became inactive causing the scenario to fail.