SugaCane

The typing error is at the enum "VDReponseCode" because Repons is Haiti-Kreolisch and not english xD Its not a big deal because everybody now what it means but i thought you don't have enought bug reports from me so I open a new one xD

Pabianice should have the Signal Name "Pc" Instead of "Pa"

Like in the picture below the Station and Signal name should be Do instead of Di. Idk, if the picture is outdated or not but I thought that I report it to check if I'm wrong or not. [https://semaforek.kolej.org.pl/wiki/images/5/5c/Dionizow.jpg]

Like in the picture below the Station and Signal name should be Sc instead of Se. Idk, if the picture is outdated or not but I thought that I report it to check if I'm wrong or not. [https://semaforek.kolej.org.pl/wiki/images/d/d8/Sedzice.png]

I'm not sure if im right but should the Signals at the "Kolumna APO" be named "802_Km_X" instead of "802_Db_X"? But if you need to rename it you need to change the number infront of it. And the Signal is green while the Railway Crossing behind it is open

If you want to set an ISp, IISp or IIISp Signal as Trigger (as shown in the code below) your unable to create there one. You only can set the trigger point on an entry signal like "5291_ZW_D". I think it have something todo with the Signals you see in the top right corner. You can only set the Trigger in Signals you see in the hud in the top right corner. CreateSignalTrigger(FindSignal("5291_ZW_ISpD"), 500, { check = function (trainset) Log("Überprüfung der Lok") return true end, result = function(trainset) Log("Überprüfung geschafft") if t4_info.type == "liquid" then Log("Ist Gefahrzug. Geh an seite") VDSetRouteWithRepeat("5291_ZW_D", "5291_ZW_K2", VDOrderType.TrainRoute,0, 15) else Log("Normal. Fahre ein") VDSetRouteWithRepeat("5291_ZW_D", "5291_ZW_K2", VDOrderType.TrainRoute,0, 15) end Log("Evt. Fahrstraße eingestellt") end})

The Params are named this: --- Gets pseudo-random integer number ---@param minExclusive integer Lower bound (inclusive) ---@param maxExclusive integer Uppwer bound (exclusive) ---@return integer function GetRandomInt(minExclusive,maxExclusive) end Should be this: --- Gets pseudo-random integer number ---@param minInclusive integer Lower bound (inclusive) ---@param maxExclusive integer Uppwer bound (exclusive) ---@return integer function GetRandomInt(minInclusive,maxExclusive) end

Here you have one with ETCS from @Fightdrug

In the Singleplayer there is no Bot that takes over your Train so idk where the trouble is

If you want to set an To Signal as Trigger (as shown in the code below) your unable to create there one. You only can Sst the trigger point on an entry signal like "3792_Se_A". I think it have something todo with the Signals you see in the top right corner. You can only set the Trigger in Signals you see in the hud in the top right corner. CreateSignalTrigger(FindSignal("3792_Se_ToA"), 500, { check = function (trainset) Log("Überprüfung der Lok") return true end, result = function(trainset) Log("Überprüfung geschafft") if t4_info.type == "liquid" then Log("Ist Gefahrzug. Geh an seite") VDSetRouteWithRepeat("3792_Se_A", "3792_Se_G", VDOrderType.TrainRoute,0,15) else Log("Normal. Fahre ein") VDSetRouteWithRepeat("3792_Se_A", "3792_Se_F", VDOrderType.TrainRoute, 0, 15) end Log("Evt. Fahrstraße eingestellt") end })

The @Param loadMass have a wrong discription. It should be "Load weight in tonnes/tons" instead of "kilograms"

An bigger Bugreport of missing things or broken things: Idk but I don't know of any twist switches that look like this one. To me, they're just standard on/off buttons: On the left Side of cabin A and B from the train, are 3 screws missing Original Picture: If you drive on Cabin B you still have some sound missing like when you E-Brake you don't hear when the air is releasing. The Bot is not able to drive via Cabin B and youre not able to set the Player in Cabin B. And if you couble 2 Impulse its kinda broke because it shakes very much. There is a vent missing on the Camerascreenboxi inside the Cabin:

Ich sehe da keinen Mehrwert drin. Warum sollte man einen "Zug Simulator" spielen, wenn man nur als Gast mitfahren möchte. Dann gehe einfach selber zu irgendeinem Bahnhof und setze dich selber in einen Zug. Hast du ein viel besseres Erlebniss.

Would it be possible to programm a little window in the CCTV camera so you could jump from camera 2 to 4 and 1? So something like this in the picture below? Because it sucks like in Łódź Chojny you need to click trough every camera to close the railway crossings. There it would be easy to controll the crossings over the relays desk. Because Łódź Chojny the relay desk is kinda fictional so why don't put the railway crossing buttons on the desk. So just place there some buttons to controll the crossings. It would be make is much easier

The 154065 and 154067 was Standing in Łódź Olechów and got deleted. The Bot don't send a request for 1520XX after driving via left Track towards Łódź Olechów because he was to early

In Łódź Chojny you're not able to dim you lights. YOu can just turn them off and on and if you switch the lights off there are still 2 lights glowing

In Retkinia I'm not able to dimm the lights. THere is only off and on.

If you look to far up in the Impulse your sun visor gets invisible

When you are standing infront of the APOs like Kolumna you get deleted after some time. And sometimes the Railway crossing at the APOs gets Broke so noone can drive. My solution is that the Dispatcher can control the railway crossing at the APOs if something isn't right or just fix the bots xD

S: lodz_zgierz_terrain_x33_z348, P: (17050.92, 203.79, 178209.70), R: (12.81, 172.98, 0.00) The Pole is Flying And if you zoom compleetly out the Poles get invisible. But If you zoom in a little bit the Poles are visible S: lodz_zgierz_terrain_x33_z348, P: (17050.91, 203.99, 178211.30), R: (343.02, 161.36, 0.00)

I found some Track issues: S: pabianice_rogow_terrain_x20_z307, P: (10438.69, 193.93, 157614.90), R: (69.71, 319.56, 0.00) The Wood is Clipping into the concrete S: pabianice_rogow_terrain_x20_z307, P: (10448.13, 193.96, 157622.60), R: (55.06, 320.35, 0.00) There is something missing right?

In Pabianice you can't hover or klick on the Track by Peron 1 to See what Train is standin there. And you don't see any Track Occupation on the Track from Lask to me. And there is a missing slip path from A/B to K/L/M/N

Here is the Picture from inside the Station

After I wanted to turn on the SZ, the display didn't switched to gray and there was no message like "Ready to turn on the SZ"

In the F1 Menu has the Signal "V" the wrong Name and its very misleading. You think that SIgnal "V" is one of Zdunska Wola but instead its the Signal from ZWK (Zduńska Wola Południowa)