Lazy Lc change of direction

[Aero1995]

Sometimes I have to change direction on track 3 but how can I accept it ? I communicate by phone with the other station and I accept that the train can come and the 3rd track starts flashing white which button can I use to accept ?

[Len]

I have had the same issue on that board.

[Aurel]

30 minutes ago, Bence said:

Sometimes I have to change direction on track 3 but how can I accept it ? I communicate by phone with the other station and I accept that the train can come and the 3rd track starts flashing white which button can I use to accept ?

It's Pzk3, on the top of the lines on the right. 

Aurel

[Aero1995]

1 hour ago, Aurel said:

It's Pzk3, on the top of the lines on the right. 

Aurel

Thanks I will check later. 😃

[FluffyAdmiral]

During normal operations, you don't need to change any directions at Lazy Lc. The most you'll ever need to do is to press Pzk for track 3 or 7 from Lazy LB. If Dąbrowa Górnicza asks you to use track 3, you can tell that other track is free [4 or 2 normally] and the train should be routed that way.

If you need to change direction of track 3 then:

- to change from outbound to inbound you accept track request or inform Dabrowa that you can accept the train on Track 3. When the arrow will start blinking in the inbound direction look few blocks up for Pzk3 knob and press it. The arrow should shortly go solid, then you need to press NP3 knob to allow routing in opposite direction so that you can use entry semaphore to route incoming train.

- to change from inbound to oubound you need to use Zwbl3. The arrow will blink for a few seconds and then both arrows will be unlit. After that, just press Wbl and AI on Dabrowa should shortly accept the line lock in outbound direction.

[SurvivorSean]

So far I find the big boards for the most part are all set-up for straight through runs.  With the exception of some trains coming in off the very bottom of the board to flow into the traffic pattern.

It will be interesting to see these other exits come into play I take it with the full schedule.

Thanks

Sean

[Skully]

It can happen when DGZ gets busy. Don't expect Łazy Łc to be straight through. 😃

For those who like pictures:

7 hours ago, FluffyAdmiral said:

If you need to change direction of track 3 then:

- to change from outbound to inbound you accept track request or inform Dabrowa that you can accept the train on Track 3.

7 hours ago, FluffyAdmiral said:

When the arrow will start blinking in the inbound direction look few blocks up for Pzk3 knob and press it.

7 hours ago, FluffyAdmiral said:

The arrow should shortly go solid, then you need to press NP3 knob to allow routing in opposite direction so that you can use entry semaphore to route incoming train.

Make sure you reset NP3 as you do not wish to accept anymore incoming traffic.

7 hours ago, FluffyAdmiral said:

- to change from inbound to oubound you need to use Zwbl3. The arrow will blink for a few seconds and then both arrows will be unlit. After that, just press Wbl and AI on Dabrowa should shortly accept the line lock in outbound direction.

The objective here was to clear the trains as fast as possible. I think I can do better. 😁

[Kaito Kid]

Thanks for the mini-guide!

[SurvivorSean]

Funny you mention that because I was on Lazy LC last night and I did have some different routings the AI would send me.

Thanks

Sean

[Aero1995]

7 hours ago, Skully said:

It can happen when DGZ gets busy. Don't expect Łazy Łc to be straight through. 😃

For those who like pictures:

Make sure you reset NP3 as you do not wish to accept anymore incoming traffic.

The objective here was to clear the trains as fast as possible. I think I can do better. 😁

Thanks for the detailed answer !😀