czapus Posted Sunday at 06:05 AM Posted Sunday at 06:05 AM SCENARIUSZE CZAPUSIA Misja nr.1 [Cargo] LTE 113520 Skierniewice ---> Łódź Chojny >>>TDE 162001 Łódź Chojny ----> Wrocław Brochów (Sieradz) Scenariusz zawiera nagrane dialogi , manewry i ponad półtorej godziny trasy Misja nr.2 [Pasażer] iC "ORZESZKOWA" 61152 Szklarska Poręba Górna (Piotrków Trybunalski) -- Warszawa Wschodnia Scenariusz zawiera nagrane dialogi , oraz półtorej godziny trasy POBIERANIE https://steamcommunity.com/sharedfiles/filedetails/?id=3683243234
zbyszek.1961 Posted Sunday at 06:45 PM Posted Sunday at 06:45 PM Witam! Dojechałem do Warszawy Zachodniej i już nie wyjechałem cały czas na semaforze czerwone światło. Po drodze gdy minołem Skierniewice podawana jest następna stacja Radziwiłów Mazowiecki nawet po jego minięciu, jak ktoś nie zna szlaku to jest zaskoczony nagłym pojawieniem się stacji Żyrardów. Dołączam plik log. SimRail_log_2026-03-29_20-05-38.txt
bart_dem Posted Sunday at 07:35 PM Posted Sunday at 07:35 PM 49 minut temu, zbyszek.1961 napisał(a): Witam! Dojechałem do Warszawy Zachodniej i już nie wyjechałem cały czas na semaforze czerwone światło. Po drodze gdy minołem Skierniewice podawana jest następna stacja Radziwiłów Mazowiecki nawet po jego minięciu, jak ktoś nie zna szlaku to jest zaskoczony nagłym pojawieniem się stacji Żyrardów. Dołączam plik log. SimRail_log_2026-03-29_20-05-38.txt 113.79 MB · 0 pobrań Potwierdzam. Dokładnie ten sam przypadek.
czapus Posted Sunday at 09:51 PM Author Posted Sunday at 09:51 PM 3 godziny temu, zbyszek.1961 napisał(a): Witam! Dojechałem do Warszawy Zachodniej i już nie wyjechałem cały czas na semaforze czerwone światło. Po drodze gdy minołem Skierniewice podawana jest następna stacja Radziwiłów Mazowiecki nawet po jego minięciu, jak ktoś nie zna szlaku to jest zaskoczony nagłym pojawieniem się stacji Żyrardów. Dołączam plik log. SimRail_log_2026-03-29_20-05-38.txt 113.79 MB · 0 pobrań Poprawiłem to , zaraz wrzuce aktualizacje. Mam nadzieje że będzie działać
zbyszek.1961 Posted Monday at 03:05 PM Posted Monday at 03:05 PM Teraz wszystko jest w porządku gratuluje fajny scenariusz.
jmluengor Posted Monday at 06:56 PM Posted Monday at 06:56 PM I can't play any of your scenarios. After the options selection screen, the scenario starts, but I can't walk towards the locomotives. Thank you for sharing your work.
czapus Posted Tuesday at 03:18 AM Author Posted Tuesday at 03:18 AM 8 godzin temu, jmluengor napisał(a): I can't play any of your scenarios. After the options selection screen, the scenario starts, but I can't walk towards the locomotives. Thank you for sharing your work. you need to wait theres an intro dialogue then the camera movement switches on
zbyszek.1961 Posted Tuesday at 05:56 AM Posted Tuesday at 05:56 AM Czy w dzisiejszym aktualizacji poprawione jest radio od "Łodzi Chojny" bo żąda kanału 2 a powinien być 5.
zbyszek.1961 Posted Tuesday at 05:58 AM Posted Tuesday at 05:58 AM Zapomniałem dodać że błąd jest na "Misja nr.1 [Cargo]"
zbyszek.1961 Posted Tuesday at 11:08 AM Posted Tuesday at 11:08 AM Próbowałem przejechać "Misja nr.1 [Cargo]" no i stoję przed "Dobroń" cały czas świeci czerwone. (dołączam plik log) Radio działa poprawnie, ale rozkład jazdy od "Łódź Lublinek" trzeba poprawić. SimRail_log_2026-03-31_11-53-11.txt
czapus Posted Tuesday at 05:07 PM Author Posted Tuesday at 05:07 PM 5 godzin temu, zbyszek.1961 napisał(a): Próbowałem przejechać "Misja nr.1 [Cargo]" no i stoję przed "Dobroń" cały czas świeci czerwone. (dołączam plik log) Radio działa poprawnie, ale rozkład jazdy od "Łódź Lublinek" trzeba poprawić. SimRail_log_2026-03-31_11-53-11.txt 111.46 MB · 0 pobrań Dobroń to jest APO (Automatyczny Posterunek Odstępowy) i semafory tam sie automatycznie podają , więc jeśli sie nie podał to jest tylko i wyłącznie wina simrail'a . Chyba że o czymś nie wiem
jmluengor Posted Wednesday at 03:59 PM Posted Wednesday at 03:59 PM I'm still having the same problem I mentioned in my previous comment. I've waited up to 10 minutes and all I've seen are several cars stopping behind bushes and then driving off again. Ten minutes is a long time.
czapus Posted Wednesday at 05:18 PM Author Posted Wednesday at 05:18 PM Godzinę temu, jmluengor napisał(a): I'm still having the same problem I mentioned in my previous comment. I've waited up to 10 minutes and all I've seen are several cars stopping behind bushes and then driving off again. Ten minutes is a long time. maybe try reinstalling? because i installed it from steam and it was all okay , if that doesnt work reach out to the devs becouse i dont know
czapus Posted Wednesday at 05:21 PM Author Posted Wednesday at 05:21 PM Godzinę temu, jmluengor napisał(a): I'm still having the same problem I mentioned in my previous comment. I've waited up to 10 minutes and all I've seen are several cars stopping behind bushes and then driving off again. Ten minutes is a long time. even a screen shot for proof 1
jmluengor Posted Wednesday at 06:11 PM Posted Wednesday at 06:11 PM How do I uninstall it? Do I cancel the subscription and reactivate it after a few minutes?
czapus Posted Wednesday at 06:22 PM Author Posted Wednesday at 06:22 PM 10 minut temu, jmluengor napisał(a): How do I uninstall it? Do I cancel the subscription and reactivate it after a few minutes? yeah 1
jmluengor Posted Wednesday at 06:43 PM Posted Wednesday at 06:43 PM Nothing, after reinstalling, the exact same thing happens. Two cars pass, but I can't move. I also tried the second scenario, and I appear on the platform next to the Impuls II, but I still can't move. To be sure, I started another SimRail scenario, and everything works as usual (I have a powerful computer). Thank you for your work and your time.
czapus Posted Wednesday at 07:09 PM Author Posted Wednesday at 07:09 PM (edited) 26 minut temu, jmluengor napisał(a): Nothing, after reinstalling, the exact same thing happens. Two cars pass, but I can't move. I also tried the second scenario, and I appear on the platform next to the Impuls II, but I still can't move. To be sure, I started another SimRail scenario, and everything works as usual (I have a powerful computer). Thank you for your work and your time. yeah than i dont know , if you can reach out to the devs . Thanks for your feedback! Edited Wednesday at 07:10 PM by czapus
Sklox Posted yesterday at 09:43 AM Posted yesterday at 09:43 AM 14 godzin temu, jmluengor napisał(a): Nothing, after reinstalling, the exact same thing happens. Two cars pass, but I can't move. I also tried the second scenario, and I appear on the platform next to the Impuls II, but I still can't move. To be sure, I started another SimRail scenario, and everything works as usual (I have a powerful computer). Thank you for your work and your time. Can you provide the log file? Maybe something there will tell more about your problem.
jmluengor Posted 2 hours ago Posted 2 hours ago On 4/2/2026 at 11:43 AM, Sklox said: Can you provide the log file? Maybe something there will tell more about your problem. Where can I find the file? I was told a while ago, but I forgot. I'm sorry.
jmluengor Posted 1 hour ago Posted 1 hour ago Here they are! The first one corresponds to mission 1 and the second one to mission 2. SimRail_log_2026-04-03_19-15-48.txt SimRail_log_2026-04-03_19-56-49.txt
Sklox Posted 1 hour ago Posted 1 hour ago @jmluengor Found the problem where I was suspecting. The scenarios don't work if the game is not set to Polish language because the game is waiting for audio file to finish playing which isn't happening because here audio files are only set to play in Polish language. The creator has to fix it by adding English versions or at least - setting Polish ones to play as English ones. @czapus - kolega co ma problem gra w języku hiszpańskim, Simrail jeżeli nie wykryje plików danego języka (tu: hiszpańskiego) to przełącza się domyślnie na język angielski a u ciebie zdefiniowane są tylko pliki audio dla języka polskiego przez co scenariusz mu się nie kontynuuje bo gra nie może znaleźc angielskich plików. Pozwoliłem sobie spojrzeć w pliki scenariusza i znalazłem możliwe rozwiązanie: spróbuj w "sounds.lua" pododawać do każdego pliku audio linijkę [Languages.English] = "1.mp3" i tak dalej. Przy okazji - w logach wywala nazwanie różnych pociągów tymi samymi nazwami, sprawdź czy jakieś się nie powtarzają.
Recommended Posts