jeroezie Posted January 13 Posted January 13 The train brake handle of loco EP08_013 can get stuck in the running position when being towed by another vehicle. It can happen after changing from towing the loco to being the towed locomotive (changing directions with the set of two loco's). I tried to replicate the problem with EP08_001 but that one worked fine. A custom scenario with this problem is provided. Start up the EP08_013 loco first, then drive to the ET22_664, prepare the ET22 for towing (set passive drive switch to jazda Ciagniona, activate the battery, set direct/loco brake handles s to release, set indirect/train brake handles to disabled and release the handbrake), couple up and drive. You can follow the signals, and stop behind the signal on an dead end track or when the stop pop up appears, the shunting signal in rear will clear and you can switch loco until the bug appears. With my test run (log attached), the bug appeared after departing from the Id_Tm62 signal. loco_test.zip SimRail_log_2025-01-13_23-09-27.txt
SIMRAIL Team Admin BOT Posted January 17 SIMRAIL Team Posted January 17 Thank you for reporting this issue! Internal ticket number: #3846 Dziękujemy za zgłoszenie tego problemu! Wewnętrzny numer zgłoszenia: #3846
Recommended Posts