Tuco Posted July 2 Share Posted July 2 Hello all! It's my first post here and also first scenario ever made for Simrail. There shouldn't be any bugs, but may be inaccuracies, such as whether you are traveling on the correct track or through which platform. I'm not a 'mikol' but slowly becoming one - so any 'formal' tips welcome! Scenario description: You are driving a TLK 38152/3 train between Kraków Gł. - Kolobrzeg. Due to the failure of the original locomotive - it will be replaced at the technical station in Szeligi. Your job is to perform shunting (I made a small time challenge, you must leave Szeligy on time), and get to Warsaw Central Station. Info During shunting, the ability to change the camera or teleport is blocked, in addition, you have to do it in the correct cab and time is chasing you. All this together creates a small challenge from this scenario (not too difficult) Currently implemented radio communication language is Polish, important things are displayed in English on the screen. There are no messages from the dispatcher on the chat (intentionally). In the future, if the scenario likes it plans to implement other radio languages. Misc Time: 03:22 Duration: ~50 mins Installation Unzip 'Tuco' folder here: steamapps\common\SimRail\SimRail_Data\StreamingAssets\Sceneries I hope you will have fun! Tuco.zip 14 Link to comment Share on other sites More sharing options...
Friedjof Posted July 3 Share Posted July 3 Very nice scenario. I finished it in 45 minutes. ^^ small sugestion: Maybe set the train sate to shunting, so that the signaling and speeds of the HUD are correct right from the start. Line would look like this: PlayerTrainset.SetState(DynamicState.dsCold, TrainsetState.tsShunting, true) You will still have the whole starting routine. Link to comment Share on other sites More sharing options...
Tuco Posted July 3 Author Share Posted July 3 11 minut temu, Friedjof napisał(a): Very nice scenario. I finished it in 45 minutes. ^^ small sugestion: Maybe set the train sate to shunting, so that the signaling and speeds of the HUD are correct right from the start. Line would look like this: PlayerTrainset.SetState(DynamicState.dsCold, TrainsetState.tsShunting, true) You will still have the whole starting routine. Thank you! Im happy you like it. I prefer cold&dark and i think players like it too. Shunting route is generated after radio call so this s1 stop is not that bad, only for train start procedure. Link to comment Share on other sites More sharing options...
MrSkinny Posted July 3 Share Posted July 3 (edited) Hi there, haven't completed the scenario, but am excited to see new ones coming. I've been playing with building one myself and learning the LUA DSL. In early playing with it, I don't love teleport disabled by default. At least, the problem for me is you can't access the external and rear views, which I wish was separate of teleporting. In addition, I didn't know which way to run when the scenario starts to even find the train! (It's completely out of eye sight from the station.) Minor note as well, but should you have to get within 50m of the first shunting stop signal (1km away from the switch) before changing cabins to reverse? This is more a curiosity of real railroading -- would the dispatcher just instruct you to move past the switch and stop the train? Edited July 3 by MrSkinny 1 Link to comment Share on other sites More sharing options...
Tuco Posted July 3 Author Share Posted July 3 (edited) 12 godzin temu, MrSkinny napisał(a): Hi there, haven't completed the scenario, but am excited to see new ones coming. I've been playing with building one myself and learning the LUA DSL. In early playing with it, I don't love teleport disabled by default. At least, the problem for me is you can't access the external and rear views, which I wish was separate of teleporting. In addition, I didn't know which way to run when the scenario starts to even find the train! (It's completely out of eye sight from the station.) Minor note as well, but should you have to get within 50m of the first shunting stop signal (1km away from the switch) and then switch cabins to reverse? This is more a curiosity of real railroading -- would the dispatcher just instruct you to move past the switch and stop the train? Thanks for feedback, loco is like 50m from start position 😮 Teleport and camera disabled are for „real” sim connecting to vagons (with 2 camera its like Arcade Game). About switch, game dont allow me change before coming to tm4 shiunting signal, but its not 1km, more like 500m? I expected it will be annoying with 25km/h, gonna think about it, also on radio its told to stop „just before” tm4, i will add this info also in text for non polish players. Edited July 4 by Tuco Link to comment Share on other sites More sharing options...
Friedjof Posted July 3 Share Posted July 3 vor 4 Stunden schrieb Friedjof: PlayerTrainset.SetState(DynamicState.dsCold, TrainsetState.tsShunting, true) vor 4 Stunden schrieb Tuco: I prefer cold&dark and i think players like it too. Shunting route is generated after radio call so this s1 stop is not that bad, only for train start procedure. I have the same opinion as you. The trainset state is not changing that. It only tells the game that this vehicle is in shunting mode. You still need cold start the whole loco, as it allready is in your scenario. 1 Link to comment Share on other sites More sharing options...
MrSkinny Posted July 3 Share Posted July 3 1 hour ago, Friedjof said: I have the same opinion as you. The trainset state is not changing that. It only tells the game that this vehicle is in shunting mode. You still need cold start the whole loco, as it allready is in your scenario. I just tested changing to `trainstate.tsShunting` and it set the train to fully started up. Not sure what it's meant to do, but doesn't seem to be what's intended. Link to comment Share on other sites More sharing options...
Tomasz Grykien Posted July 4 Share Posted July 4 Can someone tell me where this Tem4 maneuvering semaphore is, I can't start it at all, some difficult scenario, can anyone help please? Link to comment Share on other sites More sharing options...
Tuco Posted July 4 Author Share Posted July 4 3 godziny temu, Tomasz Grykien napisał(a): Can someone tell me where this Tem4 maneuvering semaphore is, I can't start it at all, some difficult scenario, can anyone help please? Tm4 = tarcza manewrowa nr 4, zobaczysz ją na hudzie po minięciu semafora Link to comment Share on other sites More sharing options...
bart_dem Posted July 4 Share Posted July 4 3 godziny temu, Tomasz Grykien napisał(a): Can someone tell me where this Tem4 maneuvering semaphore is, I can't start it at all, some difficult scenario, can anyone help please? Jak miniesz tarczę wyświetlającą biały sygnał jedź dalej aż do pierwszego niebieskiego sygnału, zatrzymaj się przed nim, zgłoś zew3 i zmień kabinę. 1 Link to comment Share on other sites More sharing options...
Alex Posted July 4 Share Posted July 4 What to do when u change cabins? Game its not relevant in telling u what to do... Other than that congrats for this immersive scenario! Loved it till time expired 😐 Link to comment Share on other sites More sharing options...
Tuco Posted July 4 Author Share Posted July 4 1 minutę temu, Alex napisał(a): What to do when u change cabins? Game its not relevant in telling u what to do... Other than that congrats for this immersive scenario! Loved it till time expired 😐 Instructions are on radio, but for english there is displayed message 'connect locomotive to vagons' Link to comment Share on other sites More sharing options...
MrSkinny Posted July 4 Share Posted July 4 10 hours ago, Tuco said: Instructions are on radio, but for english there is displayed message 'connect locomotive to vagons' Is there a reason you prefer the DisplayMessage versus the DisplayChatText area? I ask because the message is fleeting and it's easy to miss instructions. The chat text remains so you can refer back to earlier radio instructions. Also, not having a text version of all the spoken audio isn't very accessible to the hearing challenged. 🙂 1 Link to comment Share on other sites More sharing options...
Friedjof Posted July 4 Share Posted July 4 vor 22 Stunden schrieb MrSkinny: I just tested changing to `trainstate.tsShunting` and it set the train to fully started up. Not sure what it's meant to do, but doesn't seem to be what's intended. Yeah you are right. I tested it again. And same happens when I did it this time. I must have done something wrong the last time. Link to comment Share on other sites More sharing options...
Tomasz Grykien Posted July 5 Share Posted July 5 Już poradziłem sobie, super scenariusz najbardziej podobają mi się zapowiedzi na Warszawa Centralna. czy będą kolejne scenariusze takie z więcej postojami oraz dłuższe scenariusze? 1 1 Link to comment Share on other sites More sharing options...
Tuco Posted July 5 Author Share Posted July 5 8 godzin temu, Tomasz Grykien napisał(a): Już poradziłem sobie, super scenariusz najbardziej podobają mi się zapowiedzi na Warszawa Centralna. czy będą kolejne scenariusze takie z więcej postojami oraz dłuższe scenariusze? Dzięki za feedback 😎 będą scenariusze bardziej rozbudowane, ten był po naukę - teraz już mi będzie łatwiej/szybciej je robić. — Thanks for the feedback 😎 there will be more developed scenarios, this one was for learning - now it will be easier/faster for me to do them. 4 Link to comment Share on other sites More sharing options...
Tomasz Grykien Posted July 5 Share Posted July 5 Tylko proszę nie dodawaj tego ze trzeba się wyrobić do tej godziny, bez tego żeby na spokojnie sobie zrobić Dzięki bo raz mi się nie udało? Link to comment Share on other sites More sharing options...
Friedjof Posted July 5 Share Posted July 5 (edited) Am 4.7.2024 um 01:16 schrieb MrSkinny: I just tested changing to `trainstate.tsShunting` and it set the train to fully started up. Not sure what it's meant to do, but doesn't seem to be what's intended. In a recent post, it was clarified, that with the next patch this will be fixed. (Whenever that will happen) So in the future we will be able to spawn a cold started train in shunting state. Edited July 5 by Friedjof Link to comment Share on other sites More sharing options...
misiek_131415 Posted July 6 Share Posted July 6 8 godzin temu, Friedjof napisał(a): In a recent post, it was clarified, that with the next patch this will be fixed. (Whenever that will happen) So in the future we will be able to spawn a cold started train in shunting state. You can create. However, currently such a locomotive only sees semaphores at the start. He can't see the maneuvering dials. In Mr. Tuco's scenario, we're headed for Se_J, I think. So there could be a maneuvering mode here. If you had the first command, for example for Tm4, the scenario would not start. First semaphore and then the dials as normal. Yes, you can currently. Stworzyć możesz. Tylko że obecnie taka lokomotywa widzi tylko semafory na start. Nie widzi tarcz manewrowych. W scenariuszu Pana Tuco kierujemy się na Se_J chyba. Więc tutaj może być tryb manewrowy. Jakbyś miał pierwszą komendę na przykład dla Tm4 to by scenriusz nie ruszył. Pierwszy semafor a potem już tarcze normalnie. Tak obecnie możesz. 1 Link to comment Share on other sites More sharing options...
Maty556677 Posted July 8 Share Posted July 8 Hi, awesome scenario. Although many players from the Czech Republic speak English, I created Czech translation of the scenario. First you need to install the original .zip file in the post from the author, then the .zip below this post to get the translation. After extracting, move the folder Tuco to SimRail\SimRail_Data\StreamingAssets\Sceneries and overwrite the files. If there are will be more scenarios in the future, I'll be happy to translate them too, you can contact me on the official Discord, I have the same nickname there. Have fun! --- Pro ty z vás, kteří neumí anglicky, jsem vytvořil český překlad tohoto scénáře. Nejprve je třeba nainstalovat originální .zip soubor scénáře ve zprávě od autora, poté .zip pod tímto příspěvkem, abyste získali český překlad. Po extrahování přesuňte složku Tuco do složky SimRail\SimRail_Data\StreamingAssets\Sceneries a soubory přepište. Hezkou zábavu! TUCO-cs-translation.zip 1 1 Link to comment Share on other sites More sharing options...
Tomasz Grykien Posted July 9 Share Posted July 9 W dniu 8.07.2024 o 19:14, Maty556677 napisał(a): Hi, awesome scenario. Although many players from the Czech Republic speak English, I created Czech translation of the scenario. First you need to install the original .zip file in the post from the author, then the .zip below this post to get the translation. After extracting, move the folder Tuco to SimRail\SimRail_Data\StreamingAssets\Sceneries and overwrite the files. If there are will be more scenarios in the future, I'll be happy to translate them too, you can contact me on the official Discord, I have the same nickname there. Have fun! --- Pro ty z vás, kteří neumí anglicky, jsem vytvořil český překlad tohoto scénáře. Nejprve je třeba nainstalovat originální .zip soubor scénáře ve zprávě od autora, poté .zip pod tímto příspěvkem, abyste získali český překlad. Po extrahování přesuňte složku Tuco do složky SimRail\SimRail_Data\StreamingAssets\Sceneries a soubory přepište. Hezkou zábavu! TUCO-cs-translation.zip 1.31 MB · 4 pobrania Dziękujemy za kolejny scenariusz. czekam na kolejne szykuje się fajna przejażdżka Dzięki! Link to comment Share on other sites More sharing options...
Tomasz Grykien Posted July 9 Share Posted July 9 Już przejechane 😞 czy możesz to poprawić? Link to comment Share on other sites More sharing options...
bart_dem Posted July 9 Share Posted July 9 6 minut temu, Tomasz Grykien napisał(a): czy możesz to poprawić? Nie ma co poprawiać, to błąd u Ciebie. Link to comment Share on other sites More sharing options...
Tomasz Grykien Posted July 9 Share Posted July 9 5 minut temu, bart_dem napisał(a): Nie ma co poprawiać, to błąd u Ciebie. Przecież dobrze wypakowałem zrobiłem jak tam opisane, widzę że to ten sam scenariusz tylko w innym języku kiedy kolejne scenariusze w moim jeżyku Polskim. Link to comment Share on other sites More sharing options...
p.dudek23 Posted July 11 Share Posted July 11 Scenariusz top! 1 Link to comment Share on other sites More sharing options...
Recommended Posts