Mheeka Posted May 22, 2023 Posted May 22, 2023 The loading bar progresses to about 50% and then the game simply freezes up and cant do anything other than end task it in task manager. Log is attached. Any guidance will be appreciated SimRail_log_2023-05-21_10-21-51.txt
Mheeka Posted May 26, 2023 Author Posted May 26, 2023 Hi and thanks for the reply, Here's the Dxdiag file for you. It should be noted that the problem didn't occur until the recent patch so I personally don't believe my machine spec is the issue unless you've done something that perhaps significantly changes that. Also it is random and depends on which train I take. I'm looking for a pattern but for now the only additional information I can offer is it affects freight trains rather than passenger trains. I hope that helps you with ideas to the underlying causes. DxDiag.txt
SIMRAIL Team uetam Posted May 27, 2023 SIMRAIL Team Posted May 27, 2023 Have you tried to run game in lowest possible graphic preset (very low) ?
Mheeka Posted June 1, 2023 Author Posted June 1, 2023 Yes, that was recommended by the discord channel and produces the same results and it was post trying to troubleshoot it there that they recommended I come to this forum as they didn't believe it was a graphic issue. That being the case in my understanding if it were a graphics it would consistently fail which is not the case. But please feel free to share your thoughts on this as my technical knowledge may well be far less than it should be on the subject
Mheeka Posted June 3, 2023 Author Posted June 3, 2023 Update for you, I found the pattern and certainly is not graphic setting at all. If driving a train and a system restart occurs and if you then climb on to the same train you were driving before the restart is when the train will no longer load if you try hop on immediately post the restart in order to continue the trip you were on at the time you got disconnected. If one ends the task and restarts the game client at this point you can then wait a couple minutes and then board the same train you were on previously with no issue. This requires about a 5 min wait for the BOT to move it a little ways is the best I can try explain the issue. So hopefully this helps you guys figure out why one cannot get onto certain trains post a system restart. It seems to only affect the 4120xx freight trains. I havent been able to pinpoint others but can consistently reproduce the problem on those trains. I can certainly offer another log but after looking at it for some time it seems quite similar to the one I posted originally. Hope that helps you guys out and thanks for trying to help me as well.
Recommended Posts