Hymek35 Posted May 6 Posted May 6 I am trying to get the E186 to move after the brakes applied but it will not allow me to release the brakes, if I put it in to run it just does nothing. Neither brake buttons are on, I raised pantograph and checked on but it will not release. It seems every time I am put to a siding with this when someone passes this is on radio code but I am not given allowance to release. What am I supposed to do with it? Does the signaller need to send reset to code the radio?
azzorekk Posted May 6 Posted May 6 Do you mean releasing the brakes after using Radio-Stop? You have to restart the radio in order for the brakes to release.
Hymek35 Posted May 6 Author Posted May 6 No, the brakes were applied after I had cleared a siding, either I missed the signal alarm or passed the start program speed but it is not possible to release. I don't have the option to restart the radio in the 186. Don't these radio stop demands need signaller's end to allow release or is that not simulated in game?
azzorekk Posted May 6 Posted May 6 (edited) 7 minut temu, Hymek35 napisał(a): No, the brakes were applied after I had cleared a siding, either I missed the signal alarm or passed the start program speed but it is not possible to release. I don't have the option to restart the radio in the 186. Don't these radio stop demands need signaller's end to allow release or is that not simulated in game? Did you accidentally miss a CA/SHP warning? What I mean by restarting a radio is turning it off using the X on the left side of the radio and then turning it on by using the green V button, there isn't a direct option to restart it. Regarding how radio-stop works in real life I don't think the dispatcher needs to confirm to release brakes after radio-stop, but I always may be wrong. All I know is that in the game you only need to restart the radio and you are ready to go. Edited May 6 by azzorekk
Hymek35 Posted May 6 Author Posted May 6 I was on a siding with a red signal but when it cleared to go back to the mainline I went to accelerate to line speed as I couldn't see any indications of a lower restriction but the brakes were applied. I can't see any X or V buttons on the radio panel.
azzorekk Posted May 6 Posted May 6 (edited) 38 minut temu, Hymek35 napisał(a): I was on a siding with a red signal but when it cleared to go back to the mainline I went to accelerate to line speed as I couldn't see any indications of a lower restriction but the brakes were applied. I can't see any X or V buttons on the radio panel.  Sorry, I forgot that the Traxx doesn't have the Koliber radio 😅 I'm gonna attach a video of a Traxx soon. I mean these buttons. Did this happen on multiplayer or singleplayer?  Edited May 6 by azzorekk
azzorekk Posted May 6 Posted May 6 (edited) 16 godzin temu, Hymek35 napisał(a): Multiplayer Since this happened on multiplayer, my closest guess is that someone activated Radio-Stop and your train got stopped I don't know what could've caused the stop. I recreated your problem on the Żmigród testing scenario but with Radio-Stop and actually it's simpler than I thought to fix this. Simrail 2025.05.06 - 21.29.02.08.mp4 All you have to do is, disable and enable your cab and the brakes automatically release.  Edited May 7 by azzorekk Correction of information
Hymek35 Posted May 6 Author Posted May 6 How do you disable and reenable the cab? I can't find a driver key switch.
Angrypalm Posted May 7 Posted May 7 The cab on the traxx is disabled by turning off the battery on the rear wall, just behind the seat, the same place you find the light controls. 1
azzorekk Posted May 7 Posted May 7 10 godzin temu, Hymek35 napisaÅ‚(a): How do you disable and reenable the cab? I can't find a driver key switch. It's on the video I sent, behind the seatÂ
LycanAnanas Posted May 7 Posted May 7 Radiostop do not work in MP. If you press it will only work on yours loco. 1 1
azzorekk Posted May 7 Posted May 7 4 godziny temu, LycanAnanas napisał(a): Radiostop do not work in MP. If you press it will only work on yours loco. Oh sorry for missinformating. I don't know what could cause the sudden stop but I think that re-enabling the cab would still release the brakes.
Hymek35 Posted 15 hours ago Author Posted 15 hours ago It seems to be happening every now and then with the E186, it stops and then the brakes just will not release no matter what I try.Â
Fightdrug Posted 13 hours ago Posted 13 hours ago vor 2 Stunden schrieb Hymek35: It seems to be happening every now and then with the E186, it stops and then the brakes just will not release no matter what I try. do it make a piep sound while stoping ? 🤔
Recommended Posts