kolyokcica

At server int1 i was dispach in Dąbrowa Górnicza Ząbkowice. After my neighbour dispatcher logged out from Huta Katowice, T2 line request stucked (i tryed to handle accept button many times), the ring sounded continues... And jeah the f****ng server kicked off me again and again and again. REMOVE KICK OFF FUTURE!!!!!!!!!! 😞 log attached SimRail_log_2025-01-21_19-10-26.txt

This time at Kraków Batowice the track 2 was occupied with passenger train, what had train route to Raciborowice on right track. The line block to Kraków Przedmiescie on right track was occupied with a previus train. At track 4 was a train what waiting for route to Kraków Przedmiescie. At this time dispatcher assist start to abuse me to set route for the passenger train what has route on tr2. The problem caused maybe the hold train on tr4... I tryed to solve this to ask Kraków Przedmiescie tr2 for this train, but the electronic interlocking did not allow to set route to tr2 (wrong track) and i cannot find possibility to set substitude signal to the start signal. Congratulations to the developers, you managed to make me hate dispatcher mode. The dispatcher assistand has a many bug and makes the dispacher's life impossible... Thanks the kick for nothing, again and again. I highly recommend to turn off the dispatcher assist mode until not resolved the bugs around this unwanted future!

Hi! I was dispatched in Staryny server: EN1 The situation was difficult, every line block was occupied and a line block direction change was in progress with Psary (previos was a dir change also with Kozlow), and with parallel Koniecpon want to send a train. So I want to handle Koniecpon request at the end of my task queue, but the system kicked me off before it. It's very annoying, agressive solution this time. I suggest when the system detecting the dispacher not idle, then no kick! Best regards, Ivan

OK, thank you for your answer. FYI I have this resolutions only:

I use 1680x1050 and two monitors. The game using only the left one.

track7 to LK157 are not showing

I tryed to set many routes from signal Y, without success.

This is a flapping side protection situation. The switch give side protection always to the latest request. In Integra Domino 67 the operator usually lock the flapping switch (sw 43 in this situation), that solve the problem 🙂

I think, when switch 42 in straight position, it must be set switch 43 also to straight pos by side protection. Only one situation is expect, when switch 41 and 42 locked to straight pos, then sw 43 may protect the second set route.

When i set the mouse pointer to a specific skew cube witch has two light window (from left and right track), then it show two trains.

I'm uploaded one. When the problem occured the cursor jumping to another position.

When the AI train has scheduled stop and the exit signal still red, the AI starting and pulling up before the signal after sceduled departing time. I suggest, AI hold and wait at the peron, while the exit signal change to free aspect.

When I click to the switch button on the pult with right mouse button to throw the switch, the button going up for a second, then released. The switch not throwing, and the sreen looking around function begin working. It's very annoying, when I working in a high traffic station for ex. Katowice. Best regards, IvanSimRail_log_2023-06-16_09-26-37.txt bandicam 2023-06-20 13-08-17-116.mp4

When I set train route from U -> J , then switch 12, 11 adn 8 are closing as overlap protection. The problem is switch 8. This switch closed at wrong position. Best regards, Ivan

Today at about 21h UTC after I logged into station Grodzisk Mazowiecki server EN1, I detect a bad situation. I thing, before me there was an AI dispatch. Train 14139 was before signal P2, right direction and 3136, 4134 was before signal X to left direction. SimRail_log_2023-03-28_22-43-09.txt Best regards, Ivan

Today I have same problem... The HU1 server running at UTC+0 , not UTC+1 😞

HU1 server time running in UTC not LT. EDR show correct LT, but the base system use wrong time zone.

Today about 17:00 LT I detect a stuck at Muszkow from direction Zawiercie. Best regards, Ivan SimRail_log_2023-02-09_16-44-21.txt

Oh sorry, I create it at wrong place. Some admin may move it to multiplayer bug reporting topic?

Today that was the third time, when EN1 server disconnecting. Please check attached log. SimRail_log_2023-01-26_13-49-05.txt

I fill everything, but i get error message. EN9 server SimRail_log_2023-01-25_14-13-39.txt

Train 24123 in entrance signal D, but no train showing at the maps and communication window. SimRail_log_2023-01-16_15-47-07.txt

Hi! At Opocno Electronic interlock has two shunt signal with same name; op1. I think, the lower one must name op2. Best regards, Ivan

After clicking at any object, thank click to the black screen, the last object doesent lose the focus.